Cadel MITHOS PLUS 12 PS Скачать руководство пользователя страница 31

Страница: 31 / 44

ATENA - DUKE - SABA - MITHOS

Fig. 105 - Diffuser assembly

Fig. 106 - Athena in the corner

Corner installation is prohibited. The rear hot air causes the stove to overheat which triggers the thermostat

alarm

Fig. 106

6.20 ELECTRIC CONNECTION

Warning: the appliance must be installed by an authorized technician!

• The electric connection occurs through a cable with plug put in an electric socket which is able to support charge and tension

specific of every model, as described in the technical datas table (see

FEATURES a pag. 40

• The plug must be easily accessible when the appliance is installed.

• Please further assure you that your network is endowed with an efficient earth connection: if it does not exist or if it is not

efficient, please endow you with one in compliance with the law.

• Connect the supply cable first on the back of the stove (see

Fig. 107

and

Fig. 108

) and then at a wall electric socket.

Fig. 107 - Electric socket with master switch

Fig. 108 - Plug connected

• Do not use extension cables.

• If the feeder cable is damaged, it must be replaced by an authorized technician.

• When the stove is not going to be used for a long period of time, it advisable to remove the plug from the socket on the wall.

• An electrical connection to a UPS/ACCUMULATOR/ STABILISER must guarantee a voltage of at least 210 V without power

surges. Considering the variety of UPS on the market regarding size and construction qualities, we cannot guarantee operation

once the stove is connected to these devices.

6.21 STOVE CALIBRATION AND DEPRESSION MEASUREMENT

This stove has a pickup point positioned on the tank in order to measure the depression of the combustion chamber and verify its

proper operation.

To do this, proceed as follows:

• Unscrew nut “D” on the rear of the stove and connect a digital pressure switch with a tube to detect the negative pressure (see

Fig. 109

Fig. 110

• Load the feed screw via appropriate function.

• Start the stove and set "Set_Flame" to power 1 (the start-up time of this stove lasts between 8 and 10 minutes to ensure

minimum draught).

Содержание MITHOS PLUS 12 PS













































Результаты поиска

Содержание MITHOS PLUS 12 PS

Отзывы:

Похожие инструкции для MITHOS PLUS 12 PS

Бренды по названию

Популярные бренды

Cadel MITHOS PLUS 12 PS, Руководство по установке

Результаты поиска

Содержание MITHOS PLUS 12 PS

Отзывы:

Похожие инструкции для MITHOS PLUS 12 PS

Бренды по названию

Популярные бренды