Cadel MITHOS PLUS 12 PS Скачать руководство пользователя страница 4

Страница: 4 / 44

ATENA - DUKE - SABA - MITHOS

2.3

STOVE HANDLING

Both whether the stove is packed or not it is necessary to observe the following instructions for handling and transporting the

stove from its sale point to its installation point and for any future movements:

• The stove must be handled with idoneous means paying attention to the existing safety regulations;

• do not turn the stove upside down and/or upset it on one side, but keep it in vertical position or as accorded with the construc-

tor instructions;

• if the stove is made up of ceramic, stone, glass or any particularly fragile material components, all must be moved with the

utmost care.

CHIMNEY FLUE

3.1

PREPARING THE SMOKE EXPULSION SYSTEM

The combustion product expulsion system is a particularly important element for the proper operation of the appliance and must

be correctly sized according to EN 13384-1.

Its creation/adaptation/verification must always be carried out by a legally qualified operator and must comply with the regula-

tions in force in the country where the appliance is installed.

The Manufacturer declines all liability for malfunctions caused by a badly sized and non-compliant smoke expulsion system.

3.2

CHIMNEY COMPONENTS

Fig. 2 - Chimney components

LEGEND

Fig. 2

Chimney pot

Fume outlet

Chimney flue

Termal insulation

External wall

Chimney union

Fume pipe

Heat generator

Inspection door

T-union with inspection plug

Содержание MITHOS PLUS 12 PS













































Результаты поиска

Содержание MITHOS PLUS 12 PS

Отзывы:

Похожие инструкции для MITHOS PLUS 12 PS

Бренды по названию

Популярные бренды

Cadel MITHOS PLUS 12 PS, Руководство по установке

Результаты поиска

Содержание MITHOS PLUS 12 PS

Отзывы:

Похожие инструкции для MITHOS PLUS 12 PS

Бренды по названию

Популярные бренды