ATENA - DUKE - SABA - MITHOS
26
Fig. 80 - Upper hot air outlet
Fig. 81 - Remove cap
Fig. 82 - Remove fan screws
Fig. 83 - Remove fan
• Remove the side panels and cover of the stove (see dedicated chapter).
• Remove the inspection door on the side near the ducting fans (see
Fig. 81
).
• Remove the screws of the fan (see
Fig. 82
).
• Turn the fan with the vent facing upwards and fix it (see
Fig. 83
).
Fig. 84 - Insert pipe
Fig. 85 - Fold the flap
Fig. 86 - Fix the pipes
• Insert the pipes in the specific seats and move it down until it is completely inserted (see
Fig. 84
).
• Bend the flap inwards with your hands (see
Fig. 85
).
• Using a flexible pipe, connect the fan vent and ducting pipe, securing them with the clamps (see
Fig. 86
).
SOLUTION C
: ducting with the upper and rear hot air outlet (see
Fig. 87
and
Fig. 88
).
Top ducting requires 1 kit code 5020003 (optional).
