Cabletron Systems SmartSTACK ETHERNET ELS10-27, Руководство пользователя

Страница: 33 / 126

Introduction
1-17
¥ LCM commands used for conÞguring the SmartSTACK Ethernet
ELS10-27 are described in Chapter 3,
Configuring Your SmartSTACK
Ethernet ELS10-27 .
¥ LCM commands used for monitoring and managing the SmartSTACK
Ethernet ELS10-27 are described in Chapter 4, Monitoring and
Managing Your SmartSTACK Ethernet ELS10-27 .
Note:
The
Getting Started with the SmartSTACK Ethernet ELS10-27
guide lists the available LCM commands, including each commandÕs
options.
1.6.1 Command Syntax Conventions
Basic LCM Commands
If you are going to manage the SmartSTACK Ethernet ELS10-27 using
LCM, you Þrst must connect the SmartSTACK Ethernet ELS10-27 to an
ASCII terminal or terminal emulator.
When you want to use LCM, begin by pressing the Enter key several
times to get the LCM prompt (
ELS10-27 >
).
Help
Displays the menu of available commands. Help can also be displayed by
typing a question mark (
? ).
Telnet support allows you to telnet to the device and gain access to LCM.
The device allows 4 sessions. Passwords for telnet are the RO and RW
community names for the device and allow the corresponding level of
access. You are not allowed to modify passwords via a Telnet session. If
an IP address is added or modiÞed using Telnet, the new address will not
take affect until the next reboot.
Erase
Entering
erase
to erase the current SmartSTACK Ethernet ELS10-27
conÞguration returns all parameters to the default values.