manualshive.com logo in svg

Cabletron Systems SmartSTACK ETHERNET ELS10-27, Руководство пользователя

Поделиться
Скачать
Cabletron Systems SmartSTACK ETHERNET ELS10-27 Скачать руководство пользователя страница 21

 

Introduction

1-5

 

 ¥ Provides port trunking to increase bandwidth.

 ¥ Provides a user selectable monitor port for enhanced troubleshooting.

 ¥ Supports Auto-negotiation.

 ¥ Operates in either Half Duplex or Full Duplex modes on all ports.

 ¥ Implements the Spanning Tree protocol (802.1D).

 ¥ ConÞgured with factory-set defaults for immediate plug-and-play 

capability (IP address is not conÞgured at factory).

In addition, the SmartSTACK Ethernet ELS10-27 offers the following 
features that can help you manage and maintain your network: 

 ¥ RMON support

 ¥ ConÞguration and management using the Simple Network 

Management Protocol (SNMP) with either an in-band or out-of-band 
connection.

 ¥ Protection against broadcast/multicast storms.

 ¥ Ability to deÞne virtual workgroups for more efÞcient bandwidth 

usage. The SmartSTACK Ethernet ELS10-27 ports can be segmented 
into 8 separate domains.

 ¥ Compilation of statistics, including Broadcast and Unicast (by port) for 

trafÞc generated to a SmartSTACK Ethernet ELS10-27 segment.

 

1.5.1  SmartSTACK Ethernet ELS10-27 Architecture

 

The SmartSTACK Ethernet ELS10-27 supports all standard Ethernet-to-
Ethernet bridging functions, has (24) 10 Mbps IEEE 802.3/Ethernet full 
duplex 10Base-T ports, (3) standard 10/100 Mbps TX full duplex Fast 
Ethernet ports, and (2) optional 100BaseFX full or half duplex Þber EPIM 
ports.

 

1.5.2  SmartSTACK Ethernet ELS10-27 Functionality

 

 ¥ Support IEEE 802.1D Spanning Tree Protocol for MAC Bridges.

A 2K entry Filtering Database with learning and aging of entries.

Содержание SmartSTACK ETHERNET ELS10-27































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды