Cabletron Systems Netlink FRX4000, Руководство пользователя

Страница: 202 / 426

12-6 FRX4000/FRX6000 4.0 User Guide, Rev 01
20, Echo Mask
allows selected sets of characters received from the user's device to avoid transmission
back to the start-stop mode DTE. Values (can be added) are:
0
= no echo mask (all characters echoed).
1
= no echo of CR.
2
= no echo of LF.
4
= no echo of VT, HT, FF.
8
= no echo of BEL, BS.
16
= no echo of ESC, ENQ.
32
= no echo of ACK, NAK, STX, SOH, EOT, ETB, ETX.
64
= no echo of editing characters as designated by parameters 16-18.
128
= no echo of all characters not mentioned above and DEL.
If parameter 5, 12, or 22 is set to anything other than
0
, X-ON and X-OFF are not
echoed. If parameter 2 is set to
0
, parameter 20 does not apply.
21, Parity
allows the PAD to check parity in the data stream from the user's device and/or to gen-
erate parity in the data stream to the user's device:
0
= no parity.
1
= parity checking.
2
= parity generation.
3
= checking and generation.
22, Page Wait
specifies the number of line feed characters that, when sent by the PAD to the DTE,
will start a Page Wait condition, suspending transmission of additional characters to
the user's device.
Configuring Async PAD Login Parameters
If an async subscriber will be required to log into an FRX4000/6000 async PAD, a
login ID must be assigned. To display a list of existing login IDs and associated PAD
profile names, press
[C]
at the Async PAD Configuration Menu (or
[A], [A], [F], [C]
from the Main Menu).
To add or change login ID parameters, press
[D]
at the Async PAD Configuration
Menu and enter a subscriber ID (described on page 12-15).