Cabletron Systems Netlink FRX4000, Руководство пользователя

Страница: 182 / 426

If use of a routing algorithm is not desired, simply accept the default, and specify only
one routing path.
Systematic Redirection
will redirect (if
Y
) all calls to Redirection Address 0 instead of the primary address. If
that address cannot be reached and
Redirect on Busy
and/or
Redirect on Out of Order
are set to
Y
, a call will be placed to Redirection Address 1, then (if necessary) Redi-
rection Address 2, and so on.
Redirect on Busy
will redirect calls (if
Y
) according to the Redirection Addresses if the current sub-
scriber has no LCNs available.
Redirect on Out of Order
will redirects calls (if
Y
) according to the Redirection Addresses if the if the current
subscriber’s port is out of order.
Connection Priority
prioritizes intra-nodal traffic; the higher the number, the higher the priority. (This pri-
ority has no effect on traffic exiting a node.)
Priorities are configured on all logical interfaces that use a physical frame relay port.
The device processor in the node uses these priorities to help determine the order in
which it will process protocols.
When configuring priorities, be careful to consider the types of
traffic being routed on other connections in the node.
1st, 2nd,etc. Path Configured
includes or excludes the associated RLP/port as a routing path to the subscriber
device. At least one path must be specified.
RLP
is the RLP containing the port specified for the next parameter.
Port
identify the port(s) that make up the routing path(s).
Redirection Address 0,1,etc.
are up to five subscribers that will be called according to the specified redirection
option. The FRX4000/6000 can redirect an X.25 call to an alternate subscriber if the
original subscriber cannot be reached. (See "
Redirect on Busy
" and "
Redirect on Out of
Order
.")
The FRX4000/6000 will call each address in the list until one is reached. If
Systematic
Redirection
is enabled, the FRX4000/6000 will not call the original called subscriber,
but will start immediately with the first subscriber in the redirection list.