Cabletron Systems Netlink FRX4000, Руководство пользователя

Страница: 276 / 426

17-2 FRX4000/FRX6000 4.0 User Guide, Rev 01
Menu items under entry A are described in Chapter 3 . The following shows where to
find the remaining operations among the menus. The chapters where items are
described are shown in parentheses. Any item not followed by a chapter/appendix
number is described in the chapter/appendix shown following the next higher level.
B Operations
A On-Line Node Operations
(Chapter 18)
A Remote Control
– allows control of a remote Cabletron frame relay access
device (FRX4000, FRX6000, SmartSwitch 1800, or FRM).
B Remote File Transfer
– transfers files between nodes.
C Remote Software Update
– updates a remote node to a new release of
FRX4000/6000 software.
D Local File Backup
– copies an FRX4000 file to a PC (running Procomm
Plus®) connected to the FRX4000's Console port.
E Set ZMODEM Path
– configures a path that will be used by
Local File Restore
(see next entry) for copying files to an FRX4000.
F Local File Restore
– copies a file to the FRX4000 from the PC running
Procomm Plus) connected to the Console port.
G Copy Backup Directory to ZMODEM PC
– copies an entire database (that was
backed up using On-Line Database Operations) to a PC (running Procomm
Plus) connected to the FRX4000's Console port.
H Copy Backup Directory from ZMODEM PC
– copies the database transferred
in item G above back to the FRX4000.
B On-Line Port Operations
(Chapter 18)
A Disable a Port
– Takes any physical or logical serial port in the node off line.
B Disable a Range of Ports
– Takes a specified group of same-type ports off
line.
C Enable a Port
– Brings any physical or logical serial port in the node on line.
D Enable a Range of Ports
– Brings a specified group of same-type ports on
line.
E Quiesce a Port
– Causes any physical or logical serial port in the node to be
taken off line when there are no active connections.
F Quiesce a Range of Ports
– Quiesces a specified group of same-type ports.
G Unquiesce a Port
– Cancels the
Quiesce a Port
command (only if there are
still active connections on the port).
H Unquiesce a Range of Ports
– Unquiesces a specified group of same-type
ports.
C On-Line Database Operations
– (Chapter 18) backs up database and/or system
files locally or remotely.
A Back up the Current Database to a Remote FRX6000
B Restore the Backed-Up Database to a Remote FRX6000
C Restore the Backed-Up Database to a Remote FRX4000
D Back up the Current Database to a Local Directory
E Restore the Database from a Local Directory
F Back Up the Current System Files to a Local Directory
(FRX6000 only)
G Restore the System Files from a Local Directory
(FRX6000 only)
D Test X.25 Address Translation Templates
– (Chapter 8) Tests templates to
assure they were correctly created.
E Re-Load Initialization to Async Console
– (Chapter 18) Sends default terminal
settings to an Auxiliary Console on the node's Console port (FRX4000) or
COM1 port (FRX6000).
F IP Ping Connectivity Test
– (Chapter 18) Uses the Ping function to determine
whether an IP host is reachable.