manualshive.com logo in svg

Cabletron Systems 9A656-04, Руководство по настройке, Страница: 95 / 172

Поделиться
Скачать
Cabletron Systems 9A656-04 Скачать руководство пользователя страница 95

9A656-04/9A686-04 Configuration Guide

2-65

LAN Emulation Client Administration Screen

SET WELLKNOWN (Command)

This command, when performed, sets the LEC Status, the Configure ELAN, ELAN Name and 
LECS Address fields to the following values:

•

Configure ELAN is set to Automatic

•

ELAN Name is empty

•

LECS Address is set to the wellknown LECS ATM Address

When the SAVE command is then executed, the LEC is created.

SAVE (Command)

Saves all changes to memory.

2.28.2 Configuring the LEC Automatically 

To configure the LEC automatically, perform the following steps:

1.

Use the arrow keys to highlight the LEC Status field.

2.

Press the SPACE bar until the “Active” option displays.

3.

Use the arrow keys to highlight the SET WELLKNOWN command.

4.

Press ENTER.

5.

Use the arrow keys to highlight the Configure ELAN field.

6.

Use the SPACE bar to toggle between the options until Automatic displays.

7.

Use the arrow keys to highlight the ELAN Name field. Enter a name for the ELAN that is 
no more than 32 characters in length. This step is optional, and does not have to be 
performed to configure the LEC automatically.

8.

Use the arrow keys to highlight the LECS ATM Address field. Enter the ATM Address 
of the LECS. This step is optional, and should be performed only when a specific LECS, 
out of multiple servers, is desired for this LEC.

9.

Use the arrow keys to highlight the SAVE command at the bottom of the screen and press 
ENTER. The LEC will now use the new configuration.

NOTE

Steps 

 5

 through 

 8

 are optional, and should only be performed if the user wishes to 

specify which ELAN the LEC should join, and to which LECS the LEC should 
connect.

NOTE

In the following step, if the ELAN Name field is left blank, the SmartSwitch 9500 will 
attempt to join the default ELAN, as defined by the wellknown LECS.

Содержание 9A656-04













































































































































































Отзывы:

Нет отзывов