Configuring the Module in a DEChub ONE or DEChub ONE-MX 5-11
[4] Configure IP
[4] Set In-Band Interface IP Address
This option prompts you to change or enter the module’s in-band IP address, subnet
mask, and default gateway for the in-band interface. If an IP address were previously
configured, the screen displays an in-band IP address.
You do not need to configure the module with a subnet mask for SNMP
communications with management stations located on the same subnet as the module.
The factory default setting is no in-band address.
The following example shows the dialog associated with this option:
Line
Field
Description
[16.20.126.24]
This cell data represents a previously set IP
address. During the initial setup, this cell
default will appear as [ ].
[16.20.54.156]
Enter the module’s new IP address, then press
the Return key.
[255.255.255.0]
This cell data represents a previously set
Subnet Mask. During the initial setup, this cell
default will appear as [ ].
255.255.192.0
Enter the module’s new Subnet Mask, then
press the Return key.
Enter selection : 4
MS FE Hub 924TX
================================================================
IN-BAND INTERFACE IP ADDRESS CONFIGURATION
Format: The standard 4 octet dotted decimal notation in
as a decimal value, separated by a ’.’ character.
example: 16.20.40.156
To delete the IP address, enter 0 in the appropriate
Interface IP Address Subnet Mask Def.Gateway Other Info
Ethernet Port 16.20.216.91 255.255.0.0 16.21.0.1 08-00-2B-A3-CD-08
=================================================================
Enter the IP address [16.20.126.24 ] : 16.20.54.156 <Return>
Enter the Subnet Mask [255.0.0.0 ] : 255.255.0 0 : <Return>
Enter the Default Gateway [16.21.0.1] 16.21.0.1 <Return>.
.
Press Return for IP Configuration Menu.....
3
1
2
4
which each octet of the address is represented
address field.
1
2
3
4
