Configuring the Module in a DIGITAL MultiSwitch 900 4-11
[4] Configure IP
[2] Add SNMP Trap Addresses
This option prompts you to enter IP addresses to which the DIGITAL MultiSwitch Fast
Ethernet 924TX module sends SNMP traps. You can enter up to eight trap addresses.
If one or more SNMP trap addresses were previously configured, the screen displays
those addresses.
The format of an SNMP trap address is the standard 4-octet dotted decimal notation
for an IP address, where each octet of the address is represented as a decimal value,
separated by a decimal point (.), for example,
16.20.54.156
.
The following example shows the dialog associated with this option:
Line
Field
Description
Configure SNMP Trap
Addresses:
16.20.216.81
This line appears only if the module has been
previously configured.
Trap address [ ] :
16.20.216.89
<Return>
Enter the trap address that you have choosen,
then press the Return key.
Enter selection : 2
MS FE Hub 924TX - slot 8
=================================================================
ADD SNMP TRAP ADDRESSES
Format: The standard 4 octet dotted decimal notation in
decimal value, separated by a ’.’ character.
example: 16.20.54.156
=================================================================
Configured SNMP Trap Addresses: 16.20.216.81
Enter a Trap address [ ]: 16.20.216.89 <Return>
Trap address added! Enter a Trap Address [ ] : <Return>
Press Return for IP Configuration Menu...
1
2
which each octet of the address is represented as a
1
2
