Cable & Wireless CWD2601 DECT Telephone
Additional features
Helpline 0870 241 3201
53
Naming the handset
The handset can be given a name of your choice which is
displayed during standby. The name can be composed of up
to 10 alphanumeric characters.
Press
Menu
.
Use
Scroll
to scroll through the menu until DISPLAY is
displayed.
Press
OK
.
Use
Scroll
to scroll through the menu until LABEL is
displayed.
Press
OK
.
Use the
Alphanumeric
keys and
Cancel
to enter the name
for the handset.
Press
OK
to confirm the name entered and exit to LABEL.
Press and hold
Cancel
to exit to standby.
Call timer
The length of a call can be timed and displayed. The call
"
Note: The LABEL name disappears when messages
have been recieved on the Answering machine.
R
MENU
OK
OK
C
OK
C
timer starts counting as soon as the phone goes off hook.
When the call has been in progress for 10 seconds, and the
call timer has been activated, the call duration is displayed
in the format mm:ss (e.g. 00:10). When the elapsed time
reaches 59 minutes and 59 seconds (59:59), the timer
format changes to hh:mm (e.g. 01:00).
The Call timer will reset to 00:00 (mm:ss) and start over
again after 17 hr 59 min 59 sec (17:59). When the call has
ended, the call timer will stop counting and continue to
display for a further 5 seconds.
To activate
Press
Menu
.
Use
Scroll
to scroll through the menu until DISPLAY is
displayed.
Press
OK
.
Use
Scroll
to scroll through the menu until the CALL TIMER
is displayed.
Press
OK
.
Use
Scroll
to scroll until the display reads ON.
Press
OK
to confirm and exit to CALL TIMER.
Press and hold
Cancel
to exit to standby.
R
MENU
OK
OK
OK
C
CWD2600 Additional features.fm Page 53 Thursday, May 15, 2003 11:53 PM
