Cable & Wireless CWD2601 Скачать руководство пользователя страница 9

Страница: 9 / 74

Cable & Wireless CWD2601 DECT Telephone

Helpline 0870 241 3201

Safety

Information

Safety information

• Only use the mains power adaptor supplied. Using another

adaptor could damage your CWD2601 and invalidate your
warranty.

• To obtain a replacement power supply, please call the

Helpline on 0870 241 3201 (9.00am-5.00pm, Mon to Fri).

• The radio signals used by this phone system may interfere

with some hearing aids and cause a humming sound to be
heard.

• This product should not be used near emergency intensive

care medical equipment.

• This product should not be used by people fitted with a

pacemaker.

• Do not use your CWD2601 in the open air during

thunderstorms. We recommend that you unplug your
CWD2601 from the mains power and telephone socket
during storms.

• Your CWD2601 base is intended for indoor use only.

• Do not use the handset in places where there are explosive

hazards.

• Do not expose your CWD2601 or batteries to fire or water.

• Dispose of batteries safely. Do not puncture or burn them.

They contain toxic materials that could cause injury.

CWD2600 Safety.fm Page 8 Thursday, May 15, 2003 11:44 PM

Содержание CWD2601











































































Результаты поиска

Содержание CWD2601

Отзывы:

Бренды по названию

Популярные бренды

Cable & Wireless CWD2601, Руководство пользователя

Результаты поиска

Содержание CWD2601

Отзывы:

Бренды по названию

Популярные бренды