cabinaid Pro, Руководство по установке

Страница: 6 / 11

Step 2: Connect the cables to the circuit board:
Firstly attach the blue marked cable to the blue highlighted position as seen on the image
below.
Secondly attach the white cable to the white highlited position as seen on the left image.
The white cable is connected to the connecter the most on the back of the board.
The bleu cable is connecte to the connecter in front of the white cable.
As third attach the black power cable to the black highlighted position as seen on the image
below. This is next to where the other cables are connected.