cabinaid Pro, Руководство по установке

Страница: 8 / 11

Step 4:
Use the P-clip and the small cross head screw to attach the elastic band leading from
the climate control unit to the Cabinaid lid. Please use the image below to see the allocated
point where the screw needs to be placed. The right side picture shows how it should look
when the elastic band is attached to the lid.
Please be aware that the elastic band is not tangled before attachment.
Step 5: Keep the lid of the cup and plug the adapter into a wall socket to start powering the
Cabinaid Pro. If all steps were followed correctly the Cabinaid should give an Audible alarm
and the LED lighting should be flashing.
Step 6: Close the Cabinaid by placing the lid
onto the Cabinaid cup. Push firmly around
the edge, you should hear several audible
clicks when the Cabinaid lid has sealed off
the cup compartment. The audible alarm
should stop and the LED lighting should stop
flashing and burn continuously.
When closed the Cabinaid Pro AED cabinet
should look like the picture on the right.
As a final check; check if the seal is closed all
around the cup by applying pressure all-
round the edge of the lid.