cabinaid Pro, Руководство по установке

Страница: 10 / 11

Step 3: Use a drill to drill a hole into the handle of the Cabinaid lid. It is best to drill from the
back through the handle at the indicated location. See the image below for the location of the
hole.
Step 4: Align the drilled hole in the handle with the lock bracket and close the Cabinaid AED
cabinet. You are now able to attach a locking mechanism of choice to the Cabinaid.
Installation of the optional divider plates
When you purchased the optional divider plates with your Cabinaid AED cabinet, please
follow these instructions to install the divider plates.
Step 1: Open the Cabinaid by pulling the handle and remove the lid from the storage
compartment.
Step 2: Carefully losen the LED clips and hexagon cap screws with the LED lighting hose to be
able to install the divider plates.
Step 3: Take the divider plates and place them at the indicated locations using 2 hexagon cap
screws and LED clips per plate to fasten the plates. The total of 4 screws and 4 washers come
with the 3 divider plates. Please use the can use the image below as a reference. Please note
that this is a reference without LED lighting.