System Administration with EmWeb
UM1600-2-A 2002
46
DSL Line Configuration
This section covers how to create, display, modify, or delete the line profile
and alarm profile by selecting
DSL Line Configuration
from EmWeb Menu.
This section will cover all the function from
DSL Line Configuration
Menu.
Creating a Line Profile
{Create Line Profile}
This section describes how to create an ADSL line profile.
1. Click on “
Create Line Profile
” of
DSL Profile configuration
Menu.
The
Create Line Profile
screen appears as follows:
2. Configure the name of line profile, say
SERVICE512K64K
.
3. Configure the line profile on CO side (Down Stream). For example,
Configure the line type, transmit rate adaptation, target SNR margin, minimum
transmit rate, maximum transmit rate, and interleave delay as
Interleaved,
AdaptAtStartup, 7
db,
32
Kbps,
512
Kbps, and
8
milli-seconds.
4. Configure the line profile on RT side (Up Stream). For example,
Configure the line type, transmit rate adaptation, target SNR margin, minimum
transmit rate, maximum transmit rate, and interleave delay as
Interleaved,
AdaptAtStartup, 7
db,
32
Kbps,
64
Kbps, and
8
milliseconds.
5. Click on the
Apply
button to submit your changes, or click on the
Cancel
button if you want to clear all the values you have configured.
Содержание IPAM-1600s Series
Страница 1: ...I IP PA AM M 1 16 60 00 0s s Standalone 16 Ports IP DSLAM USER S GUIDE DOCUMENT NO UM1600 2 A 2002...
Страница 21: ...Introduction UM1600 2 A 2002 19 Fig 1 5 IPAM 1600s Ethernet All the Way Application...
Страница 141: ...Appendix A UM1600 2 A 2002 139 8 PHONE 8 T 33 PHONE 8 R 9 25 34 50 Note Connector type is 50 pin teleco champ female...
Страница 142: ......