C-Com IPAM-1600s Series Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 148

C-Com IPAM-1600s Series Скачать руководство пользователя страница 2

DISCLAIMER

The Copyright of this user manual is hold by C-Com Corporation and protected
by Taiwan’s Intellectual Property. You may not transmit, copy, modify, or
translate this manual, or reduce it or any part of it to any machine-readable form,
without the express permission of the copyright holder.

NOTIFICATIONS

This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.

Warning

: Do not open the case to avoid electric shock.

Caution

: Read this user manual before you operate the system.

C-Com Corporation

5F, No.9, Park Ave. II, SBIP Hisnchu, Taiwan, R.O.C
Tel: 886-3-5770747 Fax: 886-3-5790334
URL: http://www.c-com.com.tw

«
1
2
3
4
...
»

Содержание IPAM-1600s Series





















































































































































Отзывы:

Нет отзывов