iNetVu New Generation Service Manual
Page 28 of 53
C-COM Satellite Systems Inc.
6.
Tighten shoulder screw with washers; ensure Feed Rotator Arm is orientated and facing away
from the feed arm.
7.
Use low strength loctite 222 on M3 set screw and insert into place. This set screw will be used
for final ABCD adjustments if POL requires tilting.
8.
Insert shoulder screw into piston end of gas spring, using small plastic bushing as a spacer
and applying loctite 242.
9.
Apply jam nut on the other end of the screw and tighten into place.
