BYD G3 AUTO Скачать руководство пользователя страница 59 | Manualshive

Страница: 59 / 160

background image

BYD G3 AUTO Owner’s Manual

53

(d) Low Engine Oil Warning Indicator

This indicator warns you that engine oil
pressure is low.

In driving, if this indicator flashes or
remains on, stop your car away from the
road and stop the engine immediately.
Contact BYD service station for help.

When the engine is in idle running, this
indicator will flash occasionally or turns
on after emergency braking. In this case,
if the indicator goes out in acceleration,
it means this system is normal.

When the engine oil level is low, this
light will also be turned on. This light is
not intended to indicate engine oil level.
Engine oil level shall be checked by
dipstick.

Note

Do not continue driving when the
warning light is on – even a short
distance may damage the engine.

(e) Engine Fault Indicator

This indicator will be turned on when
there is fault with engine EFI system.
When the light is turned on, please
contact BYD service station for
repair/check as soon as possible.

(F) Low Fuel Level Warning Indicator

This indicator will turn on when the fuel
in the tank is running low. You shall refill
the tank as soon as possible.
On slope or in turning, the shaking fuel
in the tank may cause the indicator to be
turned on earlier.

(g) ABS Warning Indicator

When ignition switch is at ON, this light
will be turned on. If the anti-lock brake
system is normal, the light will be turned
off after several seconds. Later if the
system gets it trouble, this light will turn
on again.
When ABS warning light is turned on
and braking system warning indicator is
turned off, anti-lock braking system is
disabled but the braking system still
functions normally.
In this case the wheels may be locked in
braking in emergency braking and on
slippery road.

If any of the following cases, parts
monitored by the indicator system
may have problem, and please
contact BYD service station as soon
as possible.

●

When ignition switch is at ON, this

light never turns on or is always on.

●

This light is turned on in driving.

During operation if the light is on
temporally it does not mean that there is
fault.

Tips

When braking system warning
indicator is on, if ABS warning
indicator is still on, please park
the car at a safe place and contact
BYD service station immediately.
In this case, the anti-lock brake
system does not function and the
car will be extremely unstable.

(h) Door Open Warning Indicator

This light will remains on until all doors
are closed.

«
...
57
58
59
60
61
...
»

Содержание G3 AUTO

































































































































































Отзывы:

Нет отзывов

Похожие инструкции для G3 AUTO

Бренд: AA Products Страницы: 8

Бренд: JETBAG Страницы: 44

Бренд: Vauxhall Страницы: 2

Бренд: Mazda Страницы: 720

Бренд: Cadillac Страницы: 518

Бренд: Opel Страницы: 141

Бренд: XTC Страницы: 4

Бренд: Yakima Страницы: 12

Бренд: FALCON RIDGE Страницы: 6

2010 Challenger SRT

Бренд: Dodge Страницы: 444

Бренд: Rydeen Страницы: 14

Бренд: Edelbrock Страницы: 2

Бренд: Hudson Страницы: 77

2011 RDX Navigation System

Бренд: Acura Страницы: 16

Бренд: Great day Страницы: 5

Filtercharger 57-9004

Бренд: K&N Engineering Страницы: 4

Бренд: Honda Страницы: 219

Бренд: Edelbrock Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды