BYD G3 AUTO, Руководство пользователя

Страница: 108 / 160

BYD G3 AUTO Owner’s Manual
102
6. Disconnect the starting wire carefully
in the reversed order of connection:
disconnect the cathode starting wire first,
and then disconnect the anode starting
wire.
7. Take away the cloth covering the
battery, which may be spilled with
sulphuric acid.
8. To relocate the battery, you shall put
all plugs of the battery back in place.
If the battery power is discharged for
reasons unknown (such as a light
remaining on), please contact the BYD
service station for examination.
If Engine Stalls in Driving
If Engine Stalls in Driving…
1. Please slow down the car slowly,
keep moving in a straight way and
run off the road to a safe place.
2. Turn on the emergency flashlight.
3. Try again to start the engine.
If the engine can not start up, please see
"
If the Car Cannot Start Up
".
Tips
When the engine is not running,
boosters of brake and steering
device do not work, which makes
steering and braking more
difficult than usual.
● If the engine stalls in driving, do
not open the driver's door before
the car stops completely.
Steering wheel will be locked
once the driver’s door is opened,
which may cause the car out of
control.
If the Car Is Overheated
If the engine coolant thermometer
indicates overheated, or there is
power loss, loud knocking, or noisy
bang, that means the engine may be
overheated. Please handle it as per
the procedures below…
1 Drive the car off road, stop it and turn
on the emergency flashlight. Set the
transmission to N gear, and apply the
parking brake. Shut down air
conditioning if it is running.
2. If there is coolant or steam spouting
out of the radiator or expansion tank,
please shut down the engine. Open
engine hood after steam fades away. If
no coolant or steam is spouting, just
keep the engine running and make
sure the cooling fan is working; if not,
please turn off the ignition switch.
Tips
To avoid personal injury, please
keep the engine hood closed until
there is no steam coming out. The
spouting of steam or coolant
means high pressure.