BYD G3 AUTO, Руководство пользователя

Страница: 65 / 160

BYD G3 AUTO Owner’s Manual
59
Sound System
FM/AM Radio
Sound system on your BYD auto can
receive AM and FM band clearly.
Meanwhile, digital preset key makes
it easy for you to select your favorite
radio station.
Operations of Radio
Only in the position of ACC (I) or ON
(II), can you operate the sound
system. Press power/volume button
(PWR/VOL) or FM/AM button, you
can start the sound system. Turn
power/volume knob (PWR/VOL),
you can adjust the volume.
At last, the received waveband and
frequency will be displayed. To
change the waveband, just press
FM/AM button. Every time you press
FM/AM button, waveband will switch
from FM1 to FM2, FM3, AM1 and
AM2.If you listen to the stereo radio
station, "ST” will appear on the
screen. If you drive through the
place with weak radio signal, “ST”
will flicker on the screen.
Radio Selection
Five ways are available for you to
search radio station on the selected
waveband as follows: manual station
selection (TUNE), auto station selection
(SEEK), scanning and previewing
(SCAN), auto station scanning and
saving (long press SCAN) or digital
preset button.
Manual Station Selection (TUNE)
Using manual station selection button
(TUNE), you can receive your desired
broadcasting frequency. Press the top of
TUNE, you can adjust to high frequency;
press the bottom of TUNE, you can
adjust to low frequency. When your
desired frequency appears on the
screen, just stop pressing.
Auto Station Selection (SEEK)
Auto station selection is available to
search radio station with a strong signal
on certain waveband automatically. To
enable this function, press the top or
bottom of SEEK button and then release
it. Sound system will scan up or down
from the current frequency according
the place you press. When it searches
certain station with strong signal, it will
stop searching.
Scanning and Previewing (SCAN)
Scanning and previewing is available to
play all the saved radio stations on all
the wavebands for previewing. To
enable this function, press SCAN button
and then release it. “SCAN” will appear
on the screen. Sound system will play all
the saved radio stations on all the
wavebands for about 5 seconds.
Without any operation at the moment,
system will continue to play the next
radio station; when it plays your desired
station, just press SCAN and then you
can listen to it.
Preset (PRESET)
You can store the frequency of your
favorite radio stations under the six
digital preset keys. Digital preset keys
are available to save radio stations in
AM1 and AM2 on the AM waveband well
as FM1, FM2 and FM3 on FM
waveband respectively.
In saving frequency, you shall follow the
steps below:
1. Select your desired waveband
(AM or FM).
2. Use manual station selection
(TUNE), auto station selection
(SEEK), or scanning and previewing
(SCAN) to receive your desired radio
station.