BYD G3 AUTO Скачать руководство пользователя страница 38

Страница: 38 / 160

BYD G3 AUTO Owner’s Manual

●

In case of the conditions described

in the figures above, SRS airbag may
not be deployed.

Note

●

The airbag is designed to match

certain vehicle models, any variation

in suspension, tire size, bumper,

chassis and other original

equipments may adversely affect the

function of the airbag. In addition, it

is strictly prohibited to apply any

airbag parts to other vehicle models;

otherwise it might lead to airbag

system failure, resulting in personal

injuries.

●

In driving, please wear the seat belt

properly and maintain a correct

sitting posture. In driving, if you do

not wear the seat belt and lean

forward or sit in an incorrect posture,

airbag deployment may increase the

risk of injuries in accidents.

●

It’s very important for the driver to

maintain a distance of at least 25cm

between the chest and the steering

wheel, which allows maximum

protection when the airbag system is

triggered. That is to say, it’s

necessary to adjust the front seats

and the headrest according to the

figure of each occupant; in addition,

the driver’s arms shall only bend

slightly, stretching nearly straight.

●

Do not paste or cover the surface of

the steering wheel lid or the surface

near the airbag on the right of the

instrument panel with any objects;

and do not make any other decorative

treatment at such places. There two

places shall be cleaned only with dry

or slightly wetted cloth, and it is

prohibited to knocked at such places

violently.

●

It is prohibited to let child sit in the

front seat without protection. If a

collision triggers the air bag, the

child passenger may get seriously

injured or even killed.

●

Don’t leave any person, animal or

object between the driver/front seat

passenger and the air bag

deployment range. It is extremely

dangerous for an adult to hold a child

on the lap.

●

Any accessories, such as phone

holder, cup holder and ashtray, shall

not be installed on airbag decoration

lid or within airbag deployment

range. Otherwise in airbag

deployment there may be increased

risk of personal injury.

●

Don’t make any modification to any

part of the airbag system, including

labels.

●

All operation to the airbag,

including removal of airbag required

for repairing other parts (such as

detachment of the steering wheel),

can only be made by BYD authorized

service stations.

●

The airbag system must be

replaced in a BYD authorized service

station within 15 years as of the date

of delivery (manufacture date

indicated in the quality certificate and

Repair Manual). If the airbag is

replaced before that date, it shall be

recorded in the Repair Manual.

●

The airbag can only provide

protection in one accident. Once the

air bag is triggered or damaged, the

system must be replaced.

●

Please hand over all material

supplied with the car to the next

owner when transferring the car.

Please note that if the airbag is

The car rolls.

Содержание G3 AUTO

































































































































































Результаты поиска

Содержание G3 AUTO

Отзывы:

Похожие инструкции для G3 AUTO

Бренды по названию

Популярные бренды

BYD G3 AUTO, Руководство пользователя

Результаты поиска

Содержание G3 AUTO

Отзывы:

Похожие инструкции для G3 AUTO

Бренды по названию

Популярные бренды