BYD G3 AUTO Скачать руководство пользователя страница 88 | Manualshive

Страница: 88 / 160

background image

BYD G3 AUTO Owner’s Manual

82

Gear Shifting

Manual Transmission

For stable running, the manual
transmission is synchronized on all
forward gears. A lock-up device is
available to prevent gear shifting directly
from 5

th

gear to reverse gear. In gear

shifting, you shall step the clutch pedal
to the bottom; do not stay your feet on
the clutch pedal when you are not make
gear shifting, otherwise the clutch wear
may be speeded up.

Note

Shift to R gear only after the car
stops completely, otherwise the
transmission may be damaged.

After stepping on the clutch pedal, you
shall wait for a few seconds before
shifting to reverse gear, or shift to a
forward gear and wait for a few seconds.
In this way, the gears will stop rotating,
avoiding milling on each other.

In deceleration, downshifting can
provide additional braking force from the
engine. Such additional braking force
helps to keep the car at safe speed,
especially on downhill road it can
prevent the brake from overheating.

！

Warning

On slippery road surface, high
acceleration and deceleration may
cause the car out of control. Once
a collision occurs, you may suffer
personal injury.
Take special care when driving on
slippery road.

CVT Transmission

Position of Gear Shifting Lever
Gear shifting lever has four positions.
When starting the engine the lever shall
be in P (Parking) gear or N (Neutral)
gear.    When you park the car at D, N or
R gear, you shall step on braking pedal
forcibly with the feet away from
accelerator pedal.
P gear – at this position the transmission
is locked up mechanically. The lever
shall be at this gear when
starting/shutting down the engine. To
get out of this gear, step on the braking
pedal with your feet away from the
accelerator pedal.
If the procedure above fails to get gear
shifting lever out of P gear, please refer
to “

Release Gear Shifting Locking

”.

To avoid damaging the transmission,
you shall shift to P gear only after the
car stops completely.
R gear – for gear shifting from P gear to
R gear, please refer to description on P
gear. To shift from N gear to R gear, you
shall stop the car completely first.
N gear – to restart the engine after it
stalls, or to stop the car temporarily with
the engine running idle, you can use N
gear. You shall shift to P gear whenever
you leave the car.
D (driving) gear – it is used in driving.
The transmission will select proper
gears according to vehicle speed and
acceleration, When the engine is cold,
you can feel that the transmission
upshifts quickly, which is helpful to warm
up the engine.

«
...
86
87
88
89
90
...
»

Содержание G3 AUTO

































































































































































Отзывы:

Нет отзывов

Похожие инструкции для G3 AUTO

Бренд: cam Страницы: 28

Бренд: tams elektronik Страницы: 19

Бренд: Bestop Страницы: 5

Бренд: PowerMadd Страницы: 3

Бренд: Oypla Leisure Страницы: 4

Бренд: ULTIMATE SPEED Страницы: 40

Бренд: Vangear Страницы: 5

Бренд: Safe Fleet Страницы: 20

Бренд: TEINHOF Страницы: 2

Бренд: FALCON RIDGE Страницы: 4

Бренд: Honda Страницы: 10

2DA 008 136-031

Бренд: Hella Страницы: 2

Бренд: Mopar Страницы: 17

Бренд: KLAUS Multiparking Страницы: 72

TOUR EASY 4 936550

Бренд: Reimo Страницы: 4

EQ forfour 2018

Бренд: SMART Страницы: 224

Бренд: Tesla Страницы: 42

Бренд: Flash Cover Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды