background image

OPERATOR MANUAL

8

OM-ECB70

/

802019001-EN

ECB70

/

80 

9

OM-ECB70

/

802019001-EN

OPERATOR NOTICE

      This chapter instructs on safety operation procedures that should followed during the use of 

the BYD forklift.

     The operator of the forklift should have obtained the driving permit in accordance with local 

regulations.

       Before operating the forklift, check the data plate and capacity chart to know the loading 

capacity of the forklift and avoid the overloading during operation.

         Warning signs and decals are pasted on the forklift. Get familiar with the decals and its

 contents.

Notice

         Operator Qualification

Industrial vehicle can only be allowed to be operated by people with the qualification 

regulated by local laws. The operators should be those who have been specially trained and have 

experience in operating the industrial vehicles. The user or other entrusting part must confirm the 

qualification of the operators and make use of the tests before authorizing the person to operate the 

forklift.

       The operating company must make sure that the operators understand all the safety messages 

on the industrial vehicles.

     Please abide by relevant regulations and guide-principles, such as:

1.Operation of industrial vehicle

2.Lane and operative area regulation

3.Diver’s right, responsibility and standard of behavior

4.Special operation area

5.Daily maintenance and repair

6.Regular maintenance and repair

     For the proprietor, make sure following safety instruction on your industrial vehicles are observed.

DANGER

1.Unauthorized persons are not allowed to operate the industrial vehicle.

2.Safety devices and features will provide extra safety. Do not deactivate these safety device and

features.

3.Make sure that the load is well palletized and trimmed to avoid its protruding the loading

surface of forklift and thus slipping, collapsing and falling over.

4.Any modification on the forklift is not allowed. Contact with BYD before making any

modification.

        5.Do not overload. Before operation, please check the rated loading capacity and loading center 

on the capacity chart. When an attachment has been installed, abide by the rated loading capacity 

given on the attachment;

6.Do not operate the forklift after drinking. It might cause severe human injuries.

Caution

1.Read through the operation instructions before operating the forklift.

2.Operators should wear working boots and working clothes.

3.Do not operate the forklift with wet or greased hands.

4.Conduct the daily checking and regular maintenance on the forklift.

5.Stop operating the forklift when the abnormalities and damages are found on the forklift. Do

not use the forklift until the forklift is fully repaired.

 Nameplate and Decals

        The forklift has a forklift nameplate and a battery nameplate. Read them before using the 

forklift.

         The BYD forklift have notes or warning decals and signs to remind the operators of potential 

risks, as well as safety notices. Find and read all these decals and signs.

     If the notes or warning decals and signs are missing or difficult to read, please contact your 

local BYD dealer for immediate replacement.

Содержание ECB70
























Отзывы: