BYD ECB70, Руководство оператора

Страница: 12 / 23

ECB70 / 80
23
OM-ECB70 / 802019001-EN
OPERATOR MANUAL
22
OM-ECB70 / 802019001-EN
5.Indicators
Explanation on the 3 indicators:
(1)Indicator related to error, which appears in the case of error.
(2)Indicator related to the temperature, which appears when some components are overheated.
(3)Indicator related to the battery, which appears in the case of low battery and battery failure.
Trouble-shooting Methods:
The following table contains all the error messages that could be shown in the multifunction
display. Please refer to the trouble shooting method for solution when the following error occurs.
Category Warning Message Solution
Drive
LOGIC FAILURE #1 Battery charge is too low, charge the battery
LOGIC FAILURE #3 Restart the forklift
VMN LOW/VMN HIGH Restart the forklift
MASTER KO Restart the forklift
STBY I HIGH Restart the forklift
ENCODER ERROR Restart the forklift
INCORRECT START Return the gear switch to stop and restart the forklift
CAP CHARGE Restart the forklift
THERMIC SENSOR KO Restart the forklift
Chassis system
VACC NOT OK Check if the accelerator will return normally and restart the forklift
PEDAL WIRE KO Restart the forklift
Others
CONTACTOR OPEN Restart the forklift
AUX OUTPUT KO Restart the forklift
BACKWARD Switch off the forklift, return the lever to stop position and restart
the forklift
NO CAN MESSAGE #3 Restart the forklift
Battery WRONG SET BATTERY Restart the forklift
Temperature
HIGH TEMPERATURE Shut down the forklift for 5 minutes and restart it
HIGH MOTOR TEMPERATURE
After taking the recommended measures, contact the service personnel if the error message
reappears and repeats more than 3 times.
Start and Control
Using Area Overview
No. Name No. Name No. Name
1 EPB Switch 4 Steering Wheel 7 Combination Lights Control Lever
2 Get-On Handrail 5 Acceleration Pedal 8 Steering Wheel Adjusting Lever
3 Rear View Mirror 6 Brake Pedal 9 Ignition Switch
1
2
3
2
3
1
4
5
6
7
8
9