background image

OPERATOR MANUAL

6

OM-ECB70

/

802019001-EN

ECB70

/

80

7

OM-ECB70

/

802019001-EN

Declaration

Operation Notice

        BYD industrial vehicles can only be operated in the designated areas in the factory or in other 

specific environments, in compliance with Regulations on safety supervision of special equipment.

       Inappropriate use of the BYD forklift might cause damages and losses, which the operators 

or proprietor instead of BYD should be held liable for. If the forklift needs to be operated in the 

environments other than those mentioned in this manual, contact with your local BYD dealer first for 

confirmation.

        Any modification to the forklift is not allowed unless BYD’s written consent is granted. Contact 

with BYD first before modifying the forklifts.

      This manual is devised based on the standard forklifts. For other questions not covered in the 

manual, please check with BYD after sales service.

    BYD Forklift is subject to ongoing development and optimizing the design of products. 

BYD Forklift reserves the right to alter the design, equipment, technical features, and technical 

specifications and so on. No guarantee of particular features of the forklift should therefore be 

assumed from the present operator manual.

Forklift Delivery

      Every BYD forklift has passed through thorough performance tests before shipment. Although 

proper protection has also been adopted during transportation, it is advised to conduct a thorough 

inspection when the forklift arrives. Before delivering the forklifts to end customers, to guarantee 

that the forklift is in perfect condition, the followings checks should be conducted at BYD dealers:

1.Check if the wheel nuts are securely fastened.

2.Check the hydraulic oil level.

3.Check the braking function.

4.Check the travelling function.

5.Check the steering function.

6.Check the operation of mast and attachments (for counterweight forklift and stacker)

7.Check high voltage circuits.

           To avoid inconveniences in future warranty claims, please check the functions of the forklift 

and check if the forklift is complete. 

FOREWORD

         Thank you for choosing BYD electric forklifts.

         These operating instructions explain in detail how to correctly operate the BYD electric forklifts, 

as well as the procedures that you should follow when conducting checks, maintenance and repairs 

on the forklifts.

        Read through every chapter in the manual before operation for the correct use andmaintenance 

of the forklifts. When the forklift is out for rental or transportation, keep this operation instruction 

together with the forklift and make sure that operators can use the manual whenever necessary.

         Pay attention to the following signs:

DANGER

     Indicates an imminent extremely hazardous situation. Failure to avoid it will cause severe 

injuries, major property damage or even death.

Warning

         Indicates a potential extremely hazardous situation. Failure to avoid it might cause severe 

injuries, major property damage or even death

Caution

         Indicates a potential hazardous situation. Failure to avoid it might cause slight to medium 

injuries, or property damage

Note

         Note for detailed operation. Complying with the instructions will ensure a better operation of 

the BYD forklift.

Содержание ECB70
























Отзывы: