background image

ECB70

/

80 

29

OM-ECB70

/

802019001-EN

OPERATOR MANUAL

28

OM-ECB70

/

802019001-EN

Battery

Charging

     Open the charge port, and then connect the charger connector. Follow the user manual of the 

charger to charge the forklift.

TRANSPORTATION AND STORAGE

This chapter explains how to transport and store the forklift.

Loading, Transporting and Unloading

Driving into the Transport Vehicle

         Drive the forklift into the transport vehicle on turtle speed mode.

Caution

1.Have a supervisor or a second person on site as a lookout.

2.Make sure that the ground is strong enough to avoid the transport vehicle sinking into the

floor.

3.Secure the transport vehicle with fixed block.

4.During loading and unloading, constantly check the rigidity and the stability of the ramp.

Transporting and Unloading

1.Use a transport truck or a low flat bed truck to transport the vehicle.

2.Unloading the forklift by crane follows the same procedure as the loading of the forklift.

     3.When driving the forklift out of the transport vehicle, reverse the forklift with caution at low 

speed. The rest of the procedure is the same as required for driving the forklift onto the transport 

vehicle.

Содержание ECB70
























Отзывы: