BÜTTNER ELEKTRONIK – power line pure sinewave inverter
EN
32
3 Function
Device protection
The inverter is internally protected
against damage in the following events:
→
Low-voltage: The inverter switches off
when the battery voltage drops be-
low the STOP threshold. And re-starts
again when the voltage is above the
threshold of RESTART.
→
Overvoltage: The inverter switches
off when the battery voltage is above
the STOP threshold.
→
And re-starts again when the voltage is
below the threshold.
→
Overtemperature: The inverter switches
off when the internally permissible
maximum temperature is exceeded.
Only after cooling down and reset the
inverter could be restarted.
→
Overload: The inverter stops operation
and switches off. After short waiting
time the inverter starts up again auto-
matically.
MT PL 300 SI
MT PL 600 SI
MT PL 1500 SI
Input
Nominal voltage
12 V DC
Input
Voltage range
10,5 – 15 V DC
Output
Nominal voltage
230 V / AC / 50 Hz / THD <3 %
Output nominal power
300 W
600 W
1500 W
Overload / 1 second
500 W
1000 W
2600 W
Idle current
0.4 A
0.7 A
0.8 A
Nominal power
max. current
30 A
60 A
150 A
Efficiency
87 – 94 %
Weight approx.
1600 g
2100 g
3600 g
Dimension L x W x H (mm)
220 x 165 x 85
250 x 165 x 85
355 x 175 x 100
Battery cables
1.2 m – 6 mm²
1.2 m – 10 mm²
1.2 m – 35 mm²
Fusing included in
battery cable
30 A
60 A
175 A
Cooling
temperature- and load-depending
Protection against
Overload, overtemperature, output short-circuit,
overvoltage, low-voltage
Remote control input
12 V DC / 30 mA
Technical Specification
