
BÜTTNER ELEKTRONIK – power line pure sinewave inverter
EN
25
2 Appropriate use
To allow a safe connection of the inverter
to battery, switch the main switch to posi-
tion OFF before you start!
Battery cables must not be connected to
the battery in reverse polarity, otherwise
damage to the device may occur!
First of all, connect the positive cable (red)
to the positive pole of the battery. Then
connect the minus cable (black) to the
negative pole of the battery! The cables
must be installed carefully, and all bolted
connections must be secured and tightened!
Non-observance may cause fire hazard!
As shown above, the cables of the inverter
must be connected in correct polarity on
the battery.
Battery connection
vehicle / ground.Use cable cross-section
of 4 mm².
Grounding connection
The grounding connection on the inverter
should be connected to the body of
All pre-assembled screw connectors must
be checked again and tightened strongly!
Please also pay attention to screws on
the fuse holder! Additionally, check the
screws on device connection at 1500 W
version!
Warning!
!
black
red
Chassis