Bushnell 119773C Aggressor, Инструкция по эксплуатации

Страница: 9 / 40

9
Inserting the SD Card
The Trophy Cam HD Aggressor has 32MB of internal memory, which can hold only
about 18 photos (@ 8MP resolution). This is handy for testing and getting familiar
with the camera, but you will no doubt want to leave the camera unattended for longer
than a day, so using an SD card is recommended for all models. Insert the SD card
(with the camera’s power switch in the OFF position) before beginning to operate
the camera. Don’t insert or remove the SD card when the power switch is in the ON
position.
The Trophy Cam HD Aggressor uses a standard SD (Secure Digital) memory
card to save photos (in .jpg format) and/or videos (in .avi format). SD and SDHC
(High Capacity) cards up to a maximum 32GB capacity are supported. Using high
speed SD cards (SanDisk
®
SDHC rated class 6 or higher) is recommended if you will
use the 1280x720 or 1920x1080 HD video settings. Before inserting the SD card
into the card slot after opening the camera’s front cover, please make sure that the
write-protect switch on the side of the card is “off” (NOT in the “Lock” position). The
following describes how to insert and remove the SD card:
•
Insert the SD card into the card slot with its label side upwards (see
below
). A
“click” sound indicates that the card is installed successfully. If the wrong side
of the card is facing up, you will not be able to insert it without force-there is
only one correct way to insert cards. If the SD card is not installed correctly,
the device will not display an SD card icon on the LCD in SETUP mode (
the
SD card icon displayed after switching to SETUP mode will have a “lock” symbol
inside it in it if the card is locked
). Formatting the SD card by using the Trophy
Cam HD Aggressor’s “Format” parameter before using it for the first time is
recommended, especially when a card has been used in other devices
(see pg.
23, “Format” for details).
• To take out the SD card, just gently push
in the card (do not try to pull it out without
pushing in first). The card is released from the
slot and ready to be removed when you hear
the click.
WARNING: Be sure the camera’s power is switched OFF
before inserting or removing SD cards or batteries.