Bushnell 119773C Aggressor, Инструкция по эксплуатации

Страница: 21 / 40

21
Parameter
Settings
( Bold =default)
Description
Interval 10S (second)
default, with a
60M (minute)
to1S (second)
range of settings
available.
(60M-1M are set
in one minute
increments,
59S-1S are set
in one second
increments)
Selects the length of time that the camera
will “wait” until it responds to any additional
triggers from the PIR after an animal is first
detected and remains within the sensor’s
range. During this user set “ignore triggers”
interval, the camera will not capture photos/
videos. This prevents the card from filling
up with too many redundant images.
Settings begin with 10 second default when
parameter is first selected. Setting the
Interval time to 1 second will decrease
battery life.
Note: after setting down past “1S”,
settings start over at “60M”.
Sensor Level Low, Normal,
High, Auto Selects the sensitivity of the PIR sensor.
The “High” setting will make the camera
more sensitive to infrared (heat) and more
easily triggered by motion, and the “Low”
setting makes it less sensitive to heat and
motion. The High setting can be useful
when the ambient temperature is warm
(making it more difficult for the sensor to
detect animals), and the Low setting may
help in cold weather if the camera is being
triggered too often by anything warmer than
the surroundings. “Normal” is for average
or moderate conditions. The default “Auto”
setting will allow the camera to determine the
best setting based on its current operating
temperature. This is an ideal setting if the
weather is expected to change significantly
during the period the camera will be used.