Bushnell 119773C Aggressor, Инструкция по эксплуатации

Страница: 20 / 40

20
Parameter
Settings
( Bold =default)
Description
LED Control
(Multi-Flash
feature) Low, Medium,
High Controls how many LED lamps fire when
images are taken in low light. “High”=
all LEDs fire (36 or 48, depending on
the model), which is the default setting.
Set to Medium or Low if you are getting
overexposed flash photos or will place the
camera at very close range to the subject you
want to photograph. In general, select High
if most of your intended subjects will be over
30 ft. from the camera, Medium for the 15
to 30 ft. range, and Low for subjects under
15 ft. away.
Note: in video mode, set to LED
Control to "Low" if videos are overexposed
at the Medium setting.
Camera Name (Input)
See "Using the
Setup Menu Input
Screens"
Allows the user to set a custom name for the
camera. Useful for ID purposes when multiple
cameras are setup, since each camera will
imprint its name on all photos (but not videos)
it captures.
Video Size
(only affects
video clips in
Video or Hybrid
modes)
1920x1080
,
1280x720,
640x360
Selects video resolution (in pixels per frame).
Higher resolution produces better quality
videos, but creates larger files that take up
more of the SD card capacity (fills up faster).
640x360 is VGA video in "widescreen" 16:9
format. The highest setting provides HD
video. Using high speed SD cards
(SanDisk
®
SDHC class 6 or higher)
is recommended
if you will use the 1280x720 or 1920x1080
video settings.
Video Length
(only affects
video clips in
Video or Hybrid
modes)
10S (second)
default, with 60S
to 5S possible
range
Sets length per captured video clip.
Settings begin with 10 second default when
parameter is first selected. After stepping
down to 5S, video length settings start over
at 60S.