Bushnell 119773C Aggressor, Инструкция по эксплуатации

Страница: 27 / 40

27
Another socket, on the back of the camera, is also provided for accessory
mounting devices. Two optional mounting accessories, a “Bear Safe” Metal Box
(model#119757C)
and Deluxe Tree Bracket
(model#119652C)
are available-please
see your Bushnell dealer or website for more details.
Note: an accessory solar panel supplemental power source
(#119756C)
is also
available - please visit www.bushnell.com for more information.
Sensing Angle and Distance Test
To test whether the Trophy Cam HD Aggressor can effectively monitor the area you
choose, this test is recommended to check the sensing angle and monitoring distance
of the Trophy Cam HD Aggressor. To perform the test:
• Switch the Trophy Cam HD Aggressor to the SETUP mode.
• Make movements in front of the camera at several positions within the area
where you expect the game or subjects to be. Try different distances and angles
from the camera.
• If the motion indicator LED light blinks, it indicates that position can be sensed.
If it does not blink, that position is outside of the sensing area.
The results of your testing will help you find the best placement when mounting and
aiming the Trophy Cam HD Aggressor. The height away from the ground for placing
the device should vary with the animal size appropriately. In general, 3 to 6 feet is
preferred.
You can avoid potential false triggers due to temperature and motion disturbances in
front of the camera by not aiming it at a heat source or nearby tree branches or brush
(especially on windy days).
Switching ON the Camera
Once you switch to the ON mode, the motion indicator LED (red) will blink for about
10 seconds. This gives you time to close and lock the front cover of the Trophy
Cam HD Aggressor and then walk away. During this time, the motion indicator LED
will blink red continuously. After it stops blinking, the PIR is active, and any motion
that is detected by it will trigger the capture of photos or videos as programmed in
the SETUP Menu. Be sure you have read the descriptions of the Capture Number,
Video Length, Interval and Sensor Level parameters. Please note, the PIR is strongly
sensitive to ambient temperature. The greater the temperature difference between the