Bush LE-32GKA, Инструкция по эксплуатации

Страница: 44 / 73

44
TV systems management
TV systems management
Let’s get started
AD Volume: Use the to set the volume of the audio
description.
Note: If you want to change the sound mode, repeatedly
press S.MODE button on the remote control until you
find the one you want.
CHANNEL MENU
This menu allows you to retune, edit your channel list,
check your signal information, check your recorded and
schedule lists and update your TV’s software using the
over air download system.
Adjust Move
Analogue Manual Tuning
Auto Tuning
Digital Manual Tuning
Channel Edit
Signal Information
CI Information
Recorded List
Schedule List
OAD
On
Exit Back
Note: The menu shown in the diagram has been
extended to show all available options. You will need to
use the
buttons to scroll thought the menu to view all
of the options.
1. Press the MENU button on the remote control.
2. Use the buttons to select the CHANNEL
menu then press the OK button to open.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
3. Use the buttons to navigate through the menu to
select the item you wish to change.
4. After you have made all of the changes, press the
EXIT
button on the remote control to close the
CHANNEL
menu.
Auto Tuning
1. Select the Auto Tuning submenu and press the OK
button to open it.
Channel Tuning
Back Select
Adjust Move
Country
Tuning Mode DTV
Auto Tuning
UK
2. Select the tuning type using the buttons, you can
choose between DTV + ATV / DTV / Analogue TV.
Press the button and choose the country you are
tuning the TV in using the
buttons.
3. Press the button and select Auto Tuning and press
the or OK button to start the tuning process.
4. Once the tuning has finished you can set the Country,
Region and Secondary Region using the buttons,
confirm your selections by pressing the OK button.
Once you have completed all of the settings the menu
will close automatically.