Bush LE-32GKA, Инструкция по эксплуатации

Страница: 45 / 73

45
TV systems management
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105 .
TV systems management
Let’s get started
Analogue Manual Tuning
IMPORTANT:
This feature is not available in the UK as
analogue signals are no longer broadcast.
1. Press the button to select Analogue Manual Tuning
and press OK on the remote control.
Back Move Adjust
Frequency 867.875 MHz
2. The Analogue Manual Tuning menu will now open.
3. Select the storage location of the channel using the
buttons.
4. Press the button to select SYSTEM, then press the
buttons to choose between I / DK / L / M / BG.
5. Press the button to select SEARCH then
press the button to search through the different
frequencies until you find the program you want.
6. After the search, press the button to select
FINE-TUNE you can now do small adjustment to
improve the signal using the buttons.
7. Press the MENU button on the remote control to save
the channel.
IMPORTANT: If the number about to save is the same
as a channel that is already being used, the manually
adjusted channel will replace the existing channel.
Digital Manual Tuning
1. Use the button to select Digital
Manual Tuning and press OK on the remote control to
open the submenu.
Digital Manual Tuning
DTV
Radio
Data 0
0
0
Back Adjust
Press OK to search
Frequency 490 MHz
Normal Good Bad
UHF CH 47
2. The Digital Manual Tuning menu will now open.
3. Press the buttons to select the desired UHF
channel.
4. Press the OK button and the search for available
stations on that channel will begin.
5. Once the signal has been tuned the signal strength will
be displayed on the screen.
6. The menu will close and the tuned channel will be
shown on your TV screen.