Bush LE-32GKA, Инструкция по эксплуатации

Страница: 42 / 73

42
TV systems management
TV systems management
Let’s get started
PICTURE MENU
This menu allows you to select the best preset picture
mode or change them yourself.
Note: The menu shown in the diagram has been
extended to show all available options. You will need to
use the
buttons to scroll through the menu to view all
of the options.
PICTURE
Exit Back
Adjust Move
Contrast
Picture Mode
Standard
50
Brightness
Saturation
50
50
Sharpness
50
Colour Temp
Standard
Noise Reduction
On
MEMC
Off
Aspect Ratio
Auto
1. Press the
MENU
button on the remote control.
2. Use the buttons to select the PICTURE menu
then press the OK button to open.
3. Use the buttons to navigate through the menu to
select the item you wish to change.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
4. Use the buttons to change the selected sub
menu.
5. Press the MENU button on the remote control to
return to the main PICTURE menu.
6. After you have made all of the changes, press the
EXIT button on the remote control to close the
PICTURE menu.
What the sub menus do
Picture Mode: Choose between Dynamic / Standard /
Mild / Personal modes.
Contrast:
Adjusts the difference between light and dark
levels in the picture.
Brightness: Increases or decreases the amount of white
in the picture.
Saturation:
Control the intensity of the colour.
Sharpness:
Adjust the level of crispness in the edges
between light and dark areas of the picture.
Colour Temp: Choose between Standard / Warm / Cool.
The colour temp changes the amount of blue and red in
your picture.
Aspect Ratio: Choose to view the TV picture in various
formats. Choose from AUTO / 4:3 / 16:9 / Zoom 1 /
Zoom 2.
Noise Reduction: Choose between On or Off. Noise
reduction reduces the amount of picture noise (speckles
and lines etc.) of any connected device.