Bush LE-32GKA, Инструкция по эксплуатации

Страница: 26 / 73

26 First time setup
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
First time setup
Let’s get started
First time setup
1. Connect one end of an RF coaxial cable (not
supplied) to the aerial socket in your wall. Connect
the other end of the cable to the RF (75)socket in the
bottom connection panel on the back of the TV.
2. Attach all other devices to the TV following the advice
given in the instructions supplied with them.
3. Slot the plug on the TV’s mains cable into a wall
socket and turn the power on if required.
4. In standby mode, press the button on the right side
of the TV or press the button on the remote
control to turn the TV on. The red LED indicator on
the front of the TV will turn blue.
5. After pressing the OK button you will go to the First
Time Installation menu.
First Time Installation
Back Select
Adjust Move
Country
UK
Language English
Tuning Mode
DTV
Environment
Home Mode
Auto Tuning
6. Language is preset to English.
7. Next press the button on the remote control to
select Country. Use the buttons on the remote
control to select the country you are tuning the TV
in.
8. Now press the button on the remote control to
select Tuning mode. Use the buttons on the
remote control to select either ATV + DTV (analogue
and digital channels), DTV (digital channels only) or
Analogue TV (analogue channels only).
9. Press the button on the remote control to select
Environment. Use the buttons on the remote
control to select between Home Mode or Store
Mode. If you select to change to store mode, a
warning screen will appear asking if you do, press
the button to continue
Note: Store Mode should only be used if the TV is
to be used as a display in a shop.
10. Once you have completed all of the preliminary
settings press the button on the remote control
then the button to begin Auto Tuning.
Channel Tuning
Skip Exit
19
Data : 0
Radio : 0
DTV : 0
TV : 0
Programme
Programme
Programme
Programme
%... UHF CH 30 DTV