manualshive.com logo in svg

Bush Hog 1812, Руководство оператора

Поделиться
Скачать
Bush Hog 1812 Скачать руководство пользователя страница 68

OPERATION

1812   08/14

Operation Section 4-18

© 2012 Alamo Group Inc.

OPERA

T

ION

9.2 Mower Pre-Operation Inspection/Service

Before each mower use, a complete inspection and service is required to ensure the mower is in a good and
safe working condition.  Damaged and/or broken parts should be repaired and/or replaced immediately.  To
ensure the mower is ready for operation, conduct the following.  

OPS-R-0007

All Safety Shields, Guards and Safety devices including (but not
limited to) - the Deflectors, Chain Guards, Steel Guards, Gearbox
Shields, PTO integral shields, and Retractable Door Shields should
be used and maintained in good working condition.  All safety
devices should be inspected carefully at least daily for missing or
broken components.  Missing, broken, or  worn items must be
replaced at once to reduce the possibility of injury or death from
thrown objects, entanglement, or blade contact. 

(SGM-3)

Replace bent or broken blades with new blades.  NEVER ATTEMPT TO STRAIGHTEN,
WELD, OR WELD HARDFACING ON BLADES SINCE THIS WILL LIKELY CRACK OR
OTHERWISE DAMAGE THE BLADE  WITH SUBSEQUENT FAILURE AND POSSIBLY
CAUSE SERIOUS INJURY FROM THROWN BLADES. 

  

(SGM-10)

The operator’s manual and safety signs affixed on
the unit contain important instructions on the safe
and proper use of the equipment.  Maintain these
important safety features on the implement in good
condition to ensure the information is available to
the operator at all times.

•

Ensure the manual canister is secured to the
equipment with the operator’s manual inside.

•

Ensure all safety signs are in place and legible.
Replace missing, damaged, and illegible
decals.  

OPS-U- 0011

Содержание 1812























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды