Burstner I 2012, Инструкция по эксплуатации

Страница: 224 / 292

224
I-Modell - 11/12 - Ausgabe 09/11 - 2096165 - BUE-0056-05EN
Maintenance
12
„
Open bonnet (see chapter 4).
„
Put your hand behind the lamp holder (Fig. 254,1).
„
Turn the lamp holder with the lamp in an anticlockwise direction and
remove.
„
Turn bulb in an anticlockwise direction and remove from the holder.
„
Put in a new bulb.
Parking light The bulbs are changed in the engine compartment.
„
Open bonnet (see chapter 4).
„
On the front frame, unscrew and remove 2 screws (Fig. 259,1 and 2) with
washers.
„
On the apron next to the engine bay opening, unscrew and remove 2
screws (Fig. 259,4) with washers.
„
Unscrew and remove screw (Fig. 260,1) with washer.
„
Holding the plastic apron (Fig. 260,2) at the side, carefully pull it a little bit
forwards until the lamp housing is accessible.
„
Turn the swivel nut on the lamp housing in an anticlockwise direction and
remove.
„
Remove the lamp housing of the parking light (Fig. 260,3) with the lamp.
„
Remove the bulb from the lamp housing.
„
Put in a new bulb.
Fig. 258 Low beam/main beam/parking
light
Z
Below is described how to change the bulb of the right-hand parking light.
The description applies analogously to the left-hand parking light.
Fig. 259 Fixing the plastic projection Fig. 260 Plastic apron with lights