Burstner I 2012, Инструкция по эксплуатации

Страница: 187 / 292

187
I-Modell - 11/12 - Ausgabe 09/11 - 2096165 - BUE-0056-05EN
Sanitary fittings
10
10.3.3 Waste water tank heater (special equipment)
The waste water tank may be heated and is insulated. The integrated frost
guard prevents waste water from freezing.
A switch (Fig. 207,1 or Fig. 208) on the front of the bench seat or bed may be
used to switch the frost guard on and off.
The frost guard begins to heat the waste water as soon as the water temper-
ature drops to approx. 5 °C. The frost guard ends the heating process when
the waste water reaches a temperature of approx. 10 °C.
10.4 Filling the water system
„
Position the vehicle horizontally.
„
Switch on 12 V power supply on the panel.
Fig. 207 Operating switch Fig. 208 Operating switch (alternative)
X
When filling the water tank, observe the maximum permissible gross
weight of the vehicle. Luggage must be reduced accordingly when the
water tank is full.
Z
The water pump will overheat without water and can get damaged. Never
operate water pump when the water tank is empty.
Z
The Truma system (heater/boiler) has a safety/drainage valve and,
depending on the model, one or two drain cocks for emptying.
Z
Depending on the model, the Alde system (heater/boiler) has one or two
drain cocks for emptying.
Z
The water quantity can be monitored on the panel while the water tank is
filled.
Fig. 209 Drain cock (with rocking lever) Fig. 210 Drain cock (with twist cap)