Burstner I 2012, Инструкция по эксплуатации

Страница: 168 / 292

168
I-Modell - 11/12 - Ausgabe 09/11 - 2096165 - BUE-0056-05EN
Appliances
9
Switching on:
„
Open the regulator tap on the gas bottle and the gas isolator tap "Cooker".
„
Open the gas cooker lid (Fig. 179,3).
„
Depending on the model, either fold out or set up the flame protection
(Fig. 179,1).
„
Turn the control knob (Fig. 179,2) on the burner you wish to use to the igni-
tion position (large flame).
„
Press the control knob down and hold it.
„
Light the burner with a gas lighter, a match or other suitable means of
lighting.
„
Once the flame is burning, the control knob must be held down for 10 to
15 seconds, until the thermocouple automatically keeps the gas supply
open.
„
Release the control knob and turn to the desired setting.
„
If ignition is unsuccessful, repeat the entire procedure.
Switching off:
„
Turn the control knob to the 0-position. The flame fades.
„
Close the gas isolator tap "Cooker" and the regulator tap on the gas bottle.
Automatic ignition (with
lighting knob)
The gas cooker is equipped with electronic ignition.
Switching on:
„
Open the regulator tap on the gas bottle and the gas isolator tap "Cooker".
„
Open the gas cooker lid.
„
Depending on the model, fold out and lock the flame protection.
„
Turn the control knob (Fig. 180,1) on the burner you wish to use to the igni-
tion position (large flame).
„
Press the control knob down and hold it.
Fig. 179 Gas cooker
Fig. 180 Operating controls for gas
cooker