Burstner I 2012, Инструкция по эксплуатации

Страница: 160 / 292

160
I-Modell - 11/12 - Ausgabe 09/11 - 2096165 - BUE-0056-05EN
Appliances
9
Setting the time:
„
Press the button (Fig. 170,2). The time setting is displayed by the symbol
(Fig. 170,8).
„
Set the time with the buttons (Fig. 170,3 and 6).
Programming heating start:
„
Press the button (Fig. 170,5).
„
Set the switching on time within ten seconds, with the buttons (Fig. 170,3
and 6).
Selecting programmed
switching on time:
„
Keep pressing the button (Fig. 170,5) until the selected programme
number (Fig. 170,1) appears in the display.
9.3 Air conditioning unit (special equipment)
9.3.1 Dometic
To execute the individual switching commands, always point the remote con-
trol in the direction of the ceiling unit.
Operating modes The air conditioning unit has the following operating modes:
z
Automatic
z
Ventilation, manual
z
Cooling, manual
z
Heating, manual
Switching on:
„
Press the ON/OFF button (Fig. 171,9).
„
Press the "Mode" button (Fig. 171,11) as often as required until the
required mode (Fig. 171,1, 2, 3 or 4) is indicated on the display
(Fig. 171,20).
Z
If the unit is operating, always open at least one ventilation flap.
Z
In the winter, vehicle heating can be supported but not replaced by the air
conditioning unit.
Z
Also read the manufacturer's instruction manual.
Fig. 171 Remote control
1 Symbol for automatic mode
2 Symbol for cold mode
3 Symbol for warm mode
4 Symbol for ventilation mode
5 Symbol for discharged batteries
6 Time
7 Temperature display
8 Fan speed display
9 ON/OFF button
10 Fan speed button
11 "MODE" button
12 "CLOCK" button
13 Reset key
14 Interior temperature display button
"ROOM"
15 Store button "SET"
16 Light button "LIGHT"(optional)
17 Temperature unit change button
"F/C°"
18 Temperature decrease button "-"
19 Temperature increase button "+"
20 Display