Burstner Averso Скачать руководство пользователя

Страница: 126 / 224

126

Premio/Averso - 13/14 - Ausgabe 09/13 - 2354619 - BUE-0048-12EN

Appliances

9.5

Cooker

9.5.1

Gas cooker

The kitchen unit is fitted with a three-burner gas cooker.
Depending on the model, the gas cooker may be lit manually or with automatic
ignition.

Never let gas escape unburned due to danger of explosion.

Before using the cooker make sure that there is sufficient ventilation.
Open windows or the skylight.

Do not use gas cooker or gas oven for heating.

Do not fit any curtains in the immediate proximity of the cooker. Fire
hazard!

Always protect your hands with cooking gloves or potholders when han-
dling hot pots, pans and similar items. There is a risk of injury.

During activation and operation of the gas cooker, no flammable objects
or highly inflammable objects such as dishcloths, napkins etc. must be
near the gas cooker. Fire hazard!

The process of ignition must be visible from above and must not be cov-
ered by cooking pans placed on the cooker.

If there is a flame protection, always put it up when using the gas cooker.

The gas cooker lid is held closed by a spring. When closing there is
danger of getting injured!

Do not place hot objects such as cooking pans on the sink cover. The
plastic can become deformed.

Do not use the glass gas cooker lid as a hob.

Do not close the gas cooker lid while the gas cooker is in operation.

Do not apply pressure on the gas cooker lid when it is closed.

Do not place hot cooking pans on the gas cooker lid.

Keep the gas cooker lid open after cooking until the burners are cool. Oth-
erwise the glass plate could shatter.

Only use pots and pans whose diameter is appropriate for the gas cooker
burners.

When the flame goes out, the thermocouple automatically cuts the gas
supply.

Further information can be obtained in the device manufacturer's instruc-
tion manual.

Содержание Averso

































































































































































































































Результаты поиска

Содержание Averso

Отзывы:

Похожие инструкции для Averso

Бренды по названию

Популярные бренды

Burstner Averso, Инструкция по эксплуатации

Результаты поиска

Содержание Averso

Отзывы:

Похожие инструкции для Averso

Бренды по названию

Популярные бренды