Burstner Averso Скачать руководство пользователя | Manualshive

Страница: 72 / 224

background image

72

Premio/Averso - 13/14 - Ausgabe 09/13 - 2354619 - BUE-0048-12EN

Living

6

The pull-down bed is located above the rear seating group.
The pull-down bed has two locking positions in the uppermost position. The
pull-down bed is securely locked in both locking positions.

Lowering the pull-down bed:

Switch off the lamps underneath the pull-down bed.

Remove any obstacles in the area into which the pull-down bed extends
(e.g. headrests).

Fold over the back cushions.

Pull out the release area (Fig. 88,1) at the bottom. The lock is released.

With both hands, pull the pull-down bed down as far as it will go.

If the pull-down bed was in the uppermost locking position: Pull the release
area out again to override the second locking position. With both hands,
pull the pull-down bed down as far as it will go.

Make sure that the pull-down bed is in the lower end position and is not
resting on obstacles such as headrests or cushions.

Lifting the pull-down bed:

Switch off the reading lamps on the ceiling.

Using both hands, push the pull-down bed upwards as far as the first
locking position. If necessary, push the pull-down bed further upwards as
far as the uppermost locking position. When doing this, ensure that the
snap latch engages audibly in the locking bracket.

Check that the pull-down bed is locked correctly. To do this, pull down the
pull-down bed firmly.

Z

You must be able to close the pull-down bed without any great effort, so
that there is no tension in the locking position. Objects on the pull-down bed
can distort the lifting mechanism on one side, resulting in damage.

Fig. 88

Release

Fig. 89

Pull-down bed complete with

applied safety net

Z

When closing the pull-down bed, pull the side fabric panels inwards. This
prevents the fabric from getting trapped in the lock of the pull-down bed.

Z

Depending on the model, the pull-down bed is equipped with a one-piece
or two-piece safety net.

«
...
70
71
72
73
74
...
»

Содержание Averso

































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Averso

Бренд: MDG Страницы: 92

XT16-HR East West

Бренд: MDC Страницы: 113

Stirling LX MK3

Бренд: Ezytrail Страницы: 62

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды