Burstner Averso Скачать руководство пользователя страница 143

Страница: 143 / 224

143

Premio/Averso - 13/14 - Ausgabe 09/13 - 2354619 - BUE-0048-12EN

Sanitary fittings

Filling the water tank with

drinking water:

Close all water taps.

Open service flap (Fig. 180,3) (see chapter 6).

Pull the water pump out of the water tank.

Pull out the water tank (Fig. 180,2).

Clean or disinfect water tank.

Fill the water tank with drinking water.

Pouring water:

Open the water taps.

Emptying the water tank:

Close all water taps.

Open service flap (Fig. 180,3) (see chapter 6).

Pull the water pump out of the water tank.

Pull out the water tank (Fig. 180,2) and empty it.

10.2.3

Water tank 40 l (partially special equipment)

The drinking water filler neck is on the right or left side of the vehicle,
depending on the model.

The drinking water filler neck is indicated by the symbol "

" (Fig. 181,1). The

cap is open and closed using the key for the external flap locks.
The water tank is built into the seating group.

Opening:

Insert key into locking cylinder (Fig. 181,2) and turn a quarter turn in an
anticlockwise direction.

Remove cap.

Closing:

Place cap on the drinking water filler neck.

Turn key one quarter turn in a clockwise direction.

Remove key.

Check that the cap sits firmly on the drinking water filler neck.

Fig. 181 Drinking water filler neck

Содержание Averso

































































































































































































































Результаты поиска

Содержание Averso

Отзывы:

Бренды по названию

Популярные бренды

Burstner Averso, Инструкция по эксплуатации

Результаты поиска

Содержание Averso

Отзывы:

Бренды по названию

Популярные бренды