Burstner Averso, Инструкция по эксплуатации

Страница: 20 / 224

20
Premio/Averso - 13/14 - Ausgabe 09/13 - 2354619 - BUE-0048-12EN
Before the journey
3
„
In addition, push the coupling handle downwards by hand (not with your
foot). Closing and securing is carried out automatically.
„
Conduct a visual inspection: The green cylinder on the safety indicator
(Fig. 2,4) must be visible.
„
Turn handwheel in a clockwise direction until it can be felt and heard that
the torque limiting mechanism grates.
„
Push the stabilising lever down until the marking on the stabilising lever is
aligned with that on the stabilising housing (Fig. 2,5).
3.5.2 AKS 3004 stabiliser
Connecting:
„
Pull up the stabilising lever (Fig. 3,1) as far as possible.
„
Pull the coupling handle (Fig. 3,2) upwards.
„
Place the opened stabiliser on the caravan coupling. The coupling handle
must audibly lock back into its initial position.
„
In addition, push the coupling handle downwards by hand (not with your
foot). Closing and securing is carried out automatically.
„
Conduct a visual inspection: The green cylinder on the safety indicator
(Fig. 3,3) must be visible.
„
Activate the stabilising mechanism. Push the stabilising lever (Fig. 3,1)
down to its stop limit.
„
Conduct a visual inspection: The arrow (Fig. 4,2) must point to "2"
(Fig. 4,1).
3.6 Caravan control system (ATC) (special equipment)
Fig. 3 AKS 3004 stabiliser Fig. 4 Check "AKS closed"
X
The steady plus on the connection socket on the towing vehicle must be
protected with 15 A or 20 A fuses. Fire hazard!
X
The caravan control system cannot override the physically preset limits.
Do not exceed the maximum speed of 100 km/h intended by the
designers, and always adapt your speed to suit the weather, road and
traffic conditions.
Z
Also read the manufacturer's instruction manual.