Burstner Averso Скачать руководство пользователя страница 182

Страница: 182 / 224

182

Premio/Averso - 13/14 - Ausgabe 09/13 - 2354619 - BUE-0048-12EN

Wheels and tyres

13.5.3

Changing a wheel

Preparing the connected

caravan:

Loosen the stabilising device in caravan couplings with stabilising devices.
Otherwise the friction pads will be highly loaded.

Pull the handbrake of the towing vehicle and go to first gear or reverse
gear.

Preparing the disconnected

caravan:

Park the vehicle on as even and stable a surface as possible.

Apply the handbrake.

Place the support wheel diagonal to the direction of travel and secure with
suitable tools (Fig. 223).

The footplate of the vehicle jack must be levelly positioned on the
ground.

Do not tilt the vehicle jack.

Always insert the insertion profile of the AL-KO vehicle jack (special
equipment) into the retention pouch as far as possible.

If alloy wheel rims are mounted and a steel spare wheel is mounted after
a puncture: Do not drive any further than necessary (car dealer, car
workshop, tyre dealer). Only drive at a suitable speed. The different
wheels affect driving handling.

A special vehicle jack from AL-KO with holder pockets is available as spe-
cial equipment. These holder pockets are mounted on to the frame.

The AL-KO jack has a bearing capacity of 800 kg.

The wheel you have replaced should be repaired immediately.

Take note of the general instructions in this chapter.

Fig. 223 Securing support wheel

Fig. 224 Securing vehicle

Содержание Averso

































































































































































































































Результаты поиска

Содержание Averso

Отзывы:

Бренды по названию

Популярные бренды

Burstner Averso, Инструкция по эксплуатации

Результаты поиска

Содержание Averso

Отзывы:

Бренды по названию

Популярные бренды