burroughs SmartSource Edge, Инструкция по установке и эксплуатации

Страница: 18 / 33

8224 2462-001 18
Resolving Problems During Check/Card Processing
Stopped Paper/Card in Track
If an item stops in the track, it must be removed from the track before items can flow again.
Note: When this happens, you must check your application documentation for information
on clearing stopped paper/cards and the necessary recovery steps.
Prepare paper properly to prevent or minimize paper stops in the track. See “Prepare Paper
fo
r Flow” earlier in this section.
If there are repeated problems with paper moving through the track, see Section 5 of this
guide, “Jams or Unexpected Paper Stops.”
Clearing Stopped Paper/Card in Track
If an item stops in the track , press and hold down the Feed button for three seconds to move
the paper/card through the track. Check your application documentation for information about
refeeding the item that was cleared.
If Paper/Card remains in the track after holding down the Feed button, you must manually
remove the paper/card from the track. You should be able to remove the stopped items without
removing the covers.