burroughs SmartSource Edge, Инструкция по установке и эксплуатации

Страница: 29 / 33

8224 2462-001 29
Indicators/Controls
Symptom Possible Cause Solution
No green Power Indicator lit
on top of unit.
Multiple causes.
See “Power Supply” conditions.
Status indicator flashes one
time
Multiple causes. See
“Communications/Connections”
Status indicator flashes twice
Multiple causes. See
“Jams or Unexpected Paper
Stops”
Paper does not feed when
Feed Button pressed
Scanning(Red LED is always on) Waiting for finishing scanning
Unit makes noises but won’t feed
paper See “Feeder”
Power Supply
Symptom Possible Cause Solution
Unit does not power on. No
green Power Indicator lit on
top of unit after pressing
On/Off switch.
AC power cord not plugged into an
AC power outlet.
Note: Green indicator on power
supply not illuminated.
Plug AC power cord into a known
working AC power outlet.
Bad AC power outlet.
Note: Green indicator on power
supply not illuminated.
Verify that the AC power outlet is
OK; try a different circuit.
Power supply cable not fully
plugged into back of unit. Push power supply cable fully into
back of unit.
Defective power supply.
Replace power supply.
www.burroughsstore.com
Logic board error
Contact manufacturer for
maintenance.
Contact Burroughs at
1-800-448-1424 (USA) or
1-800-387-6127 (Canada). For
worldwide
numbers, go to
www.burroughsstore.com